SODAQ NETWORK

Versatile air quality monitoring device, use on the go or for stationary locations. Launching 2020 Q4, orders available October 2020.


By the year 2050 there will be over 100 billion IoT devices worldwide. No doubt the majority of these devices will be using a cellular network. The 3GPP expects the distribution of these devices to be up to 40 devices per household or over 10 devices per human being.

For The Netherlands alone, this means that over 200 million devices will be connected by 2050. The common idea is that IoT devices that use the networks NB-IoT or LTE-M should be designed to send between 1 and 300 messages per day. Spreading the devices evenly over 50.000 cells across the country would mean every cell has 4000 connections.

Testing the Global Network




If all 4000 devices per cell send 300 messages per day, this would equal to roughly 14 messages sent per second. How can we be sure that the network does indeed support this number of devices with this number of data messages per day? Is the network up to this? And what would these messages look like? Will we be using high level protocols (like HTTPS or MQTT) and what should be the payload length? Will we use JSON or XML payload or must we try to encode as efficiently as possible using NB-IoT? And how do we test this network before a massive roll out of devices takes place?


To answer these questions, SODAQ developed a Load Tester for Deutsche Telekom.


The Load Tester is a combination of a number of NB-IoT and/or LTE-M modules that are simultaneously sending data packets over the NB-IoT/LTE-M network to a hosted packet listener. We designed a custom baseboard with a modular setup that holds 1 control unit and 10 communication units, each of them being a SODAQ SFF board. The control unit communicates over 2G. The number of control units can vary, allowing for a large number of communication modules charging the network at the same time. All hardware is placed in a portable enclosure which is water and dust proof and autonomously powered by a rechargeable battery and hence will be suitable for outdoor use.During the project realization our clients (van Oord) found more use cases to test the trackers and are installing them now on the small vessels that do not have AIS transponders on board and that are therefore not displayed on the radars. The main applications within this installation is vessels’ tracking and collision avoidance. Another use case can be effectiveness assessment of the rented equipment. Now the project is in the installation phase and SODAQ will be glad to share its results in future.



Is SODAQ NETWORK for you?


Interested in learning more about our industry standard network tester? Please get in touch using the Get in Touch button on the bottom right, send an email to sales@sodaq.com or give us a call at +31 30 300 0301.

Contact Us



Menno de Graaf
Product Manager
menno.degraaf@sodaq.com
+31 6 22 69 36 99

We'll get in touch





Your message has been sent successfully!
Error, please retry. Your message has not been sent.